Search
Close this search box.

Your Restricted Electrical Licence Training Requirements Solved!

Restricted Electrical Training at Bizmatrix, Brisbane, QLD

The Restricted Electrical Licence Course is designed for non-electrical trades that are required to do incidental electrical work for their trade/qualifications.

All Bizmatrix students receive the advantage of:

  • Strong industry connections with potential employers.
  • Students qualify with superior skills / safety practices.
  • We offer post-course support.
  • 38 years of experience in training. 
  • Small class sizes for individual support.
  • Permit/license application support.

The onsite training is held in Brendale in North Brisbane, Queensland.

Whilst we offer the full range of units (see below) students only need to complete units as listed on their training permit based on their trade.

Course Requirements:​

Those who hold a Restricted Electrical Permit (obtained through the Queensland Electrical Safety Office), plus have a base trade or calling (as listed in the full guide by the Electrical Safety Office found here) or have evidence of 3 years or more of unstructured experience are eligible to apply for this training course.

These units are selected from the UEE30811 Certificate III in Electrotechnology Electrician.

You are eligible to apply for the Restricted Electrical Licence Permit if you have either of the following:

  • You have a current eligible trade licence or qualification (Certificate III level) OR
  • You have evidence of three (3) years minimum experience of work in area of licence

PLUS

  • There is a need to do incidental electrical work for my job. (This will be limited by the need and the listed eligibility scope)

Follow the form carefully to complete your Application to the Electrical Safety Office. You can further check your eligibility in more detail here.

You will need a copy of the permit before you can commence training.

The Restricted Electrical Licence Course is designed for non-electrical trades that are required to do incidental electrical work for their trade/qualifications.

Bizmatrix students come out with, superior skills and safety practices.

After your course, you will always be able to reach out to us with questions, so you always have support.

We have over 38 years experience in the electrical, gas, and electronic industry. Class sizes are kept small for individual support with the course.

We provide permit/license application support.

The onsite training is held in Brendale in North Brisbane, Queensland.

Secure your place!

Get in touch with our team today!

Why Choose Bizmatrix?​

Here’s why Bizmatrix stands out as the premier choice for gas and electrical training:

  1. Experienced Educators: Benefit from 40+ years of collective experience in gas and electrical training. Our instructors are seasoned professionals who deeply understand the industry.
  2. Small Class Sizes: Enjoy personalised attention with our small class sizes, allowing instructors to tailor their support to individual students, creating an ideal learning environment.
  3. Continuous Improvement: We regularly update our courses based on feedback and collaborate with regulatory bodies to ensure relevance and effectiveness.
  4. Tailored Course Content: Receive customised training that matches your unique learning needs, ensuring that you acquire skills tailored to your career objectives and proficiency level.
  5. Comprehensive Support: From enrolment to course completion, we provide support every step of the way, assisting with permit or license applications and offering guidance on career pathways.
  6. Elevated Standards: Our aim is to produce safe and professional “Technicians” not just tradespeople. Our rigorous training raises industry standards and produces professionals skilled in multiple trades.
  7. Assistance with Licensing: Navigate the complexities of licensing requirements with confidence. We offer guidance and support to ensure you understand and meet the necessary criteria for licensure, including assistance with logbook sign-offs.
  8. Streamlined Processes: Simplify your learning experience with institutional logbook sign-off days for students. Our user-friendly phone app makes logbook data collection efficient, reducing paperwork.
  9. Guaranteed Outcomes: Achieve the best possible results with our courses that exceed subject requirements. You’ll be equipped with comprehensive skills and knowledge to excel in your field.
  10. Integration with Other Courses: Benefit from connected training experiences. We help you connect your skill set, knowledge and versatility to other courses or to your base trade.

Having difficulty finding an licenced electrical person to sign off your logbooks? We can help:

  • Institutional Logbook Sign-off Days: we provide this service days for Restricted Electrical students. 
  • Streamlined Logbook Management: our user-friendly phone app reduces paperwork.

Units Available

Please note, while we offer all the units below, students will only need to complete units as listed on their training permit based on their trade.

Quick Details & Information Kits

Have a Permit?

If you already have a permit and are interested in training with us, please email it to us and we can assist you with figuring out which skill set you are eligible to complete. The face to face training is held onsite at Bizmatrix Brendale, in North Brisbane in Queensland. Please email it to us and you will be sent the info pack right away.

Need a Permit?

In order to complete the Restricted Electrical course, you must have a permit issued by the Electrical Safety Office. Click enquire now and we will help you with your application.

Unsure of Eligibility?

If you are unsure of your eligibility for the Restricted Electrical Licence, please speak to our team. Call us using the button below.

Why choose Bizmatrix?

No matter what point in your career you’re at, Bizmatrix training has been tailored to fit you.

✓You will gain industry connections, helping you connect to potential employers.
✓ Students qualify with superior skills / safety practices.
✓ We offer post-course support.
✓ 38 years of experience in training.
✓ Small class sizes for individual support.
✓ Permit/license application support.

What's involved in the course?

You will be required to complete 4 to 5 days of work online prior to attending face-to-face practical training.

The training is a mix of theory and practical application.

Located outside of Brisbane?

The onsite training is held in Brendale in North Brisbane, Queensland.

Regional Queensland and Interstate students often travel to Brisbane to attend our courses and we recommend these accomodation options.

See what our clients say

Kevin Slade

5/5

“I recently completed my restricted electrical revalidation. The practical and knowledge revision provided during the training was very well delivered and Mark the trainer took the time to answer any questions I had along with explanations to back it up. All in all a day well spent rather than trying to go it alone online.”

Cherian Thomas

5/5

"Recently I completed my Restricted Electrical course from Bizmatrix. I had a great experience with all the staff. Educators are very supportive and professional. Truly I recommend this institution for future candidates. Thank you Bizmatrix team. Cherian"

Darren Taylor

5/5

“Thank you to all the team at Bizmatrix. I found the staff and teachers to be extremely helpful and very knowledgeable The courses I completed were very thorough. Regards Darren”

Course Details and Pricing

Training Permit: Not required if completed with the Type B Gas Course.

Employer support letter: Not required
Licence outcome: Type B gas equipment/appliances limited to 250VAC
Logbooks: Not required
Course Delivery: Online + 5 Days F2F

Practical Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac

Total Cost: $1,995 GST FREE

Training Permit: Required (apply before training)

Employer support letter: Required
Licence outcome: Motors only – limited to 250VAC/415VAC
Logbooks: 2 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F

Practical Units:
UEECD0007 – Apply OHS/WHS
UEERL0003 – Conduct in service testing (Test &Tag)
UEERL0004 – Disconnect & Reconnect motors

Total Cost: $2,145 GST FREE

Training Permit: Required (apply before training)
Employer support letter: Required
Licence outcome: Electrical equipment limited to 250VAC
Logbooks: 3 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac

Total Cost: $2,245 GST FREE

Training Permit: Required (Apply before training)
Employer support letter: Not required
Licence outcome: Water heaters limited to 250Vac
Logbooks: 3 logbooks required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac

Total Cost: $2,295 GST FREE

———————————

Training Permit: Required (apply before training)
Employer support letter: Required
Licence outcome: Water heaters limited to 415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: Required (apply before training)
Employer support letter: Required
Licence outcome: Gas appliances/equipment limited to 250VAC
Logbooks: 3 logbooks required – Training Permit Required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac

Total Cost: $2,295 GST FREE

———————————

Training Permit: Required (apply before training)
Employer support letter: Required
Licence outcome: Water heaters limited to 415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: Required (Apply before training)
Employer support letter: Not required
Licence outcome: Refrigeration- A/C to 250/415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: Required (apply before training)
Employer support letter: Not required
Licence outcome: Electrical machine repairs to 250/415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: Required (apply before training)
Employer support letter: Not required
Licence outcome: Composite/Instrumentation to 250/415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: Required (apply before training)
Employer support letter: Not required
Licence outcome: Composite/Instrumentation to 250/415VAC
Logbooks: 6 logbooks required – Training permit required
Course Delivery: Online + 5 Days F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)
UEERL0004 – Disconnect & Reconnect
UEERL0005 – Locate rectify faults
UEERL0001 – Plugs cords 230Vac
UEERL0002 – Plugs cords 415Vac

Total Cost: $2,795 GST FREE

Training Permit: N/A
Employer support letter: N/A
Licence outcome: Nil
Logbooks: N/A
Course Delivery: 1 Day F2F Practical

Units:
UEECD0007 – Apply OHS / WHS
UEERL0003 – Conduct in Service Testing (Test & Tag)

Total Cost: $495 GST FREE

Logbook sessions with Bizmatrix is $265 per day – Signed off and supervised by our electrically licensed team
Up to 4 logbooks – Minimum 2 days
Up to 6 logbooks – Minimum 3 days

Total Cost: $265 GST FREE PER DAY

Course Training Dates

Please note: When you click “Apply Now”, you will start the process of enrolling into the course. If you want to make an enquiry, please click “Enquire Now” above.

Class Name Course Dates

Online due dates

Class Times

 
Training Locations Available Spaces

Pricing - to be confirmed

REL-6-2024 Restricted Electrical Course eLearning due by:08/04/2024   Face-to-Face Dates: REL Face to face week 8 - 12 April 2024 eLearning due by:08/04/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 6 General Pricing $1,995.00
REL-7-2024 Restricted Electrical Course eLearning due by:29/04/2024   Face-to-Face Dates: REL Face to face week 29 April - 3 May 2024 eLearning due by:29/04/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 6 General Pricing $1,995.00
REL-8-2024 Restricted Electrical Course eLearning due by:13/05/2024   Face-to-Face Dates: REL Face to face week 13 - 17 May 2024 eLearning due by:13/05/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 7 General Pricing $1,995.00
REL-9-2024 Restricted Electrical Course eLearning due by:27/05/2024   Face-to-Face Dates: REL Face to face week 27 - 31 May 2024 eLearning due by:27/05/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 8 General Pricing $1,995.00
REL-10-2024 Restricted Electrical Course eLearning due by:10/06/2024   Face-to-Face Dates: REL face to face week 10 - 14 June 2024 eLearning due by:10/06/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 8 General Pricing $1,995.00
REL-11-2024 Restricted Electrical Course eLearning due by:24/06/2024   Face-to-Face Dates: REL Face to face week 24 - 28 June 2024 eLearning due by:24/06/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 8 General Pricing $1,995.00
REL-12-2024 Restricted Electrical Course eLearning due by:08/07/2024   Face-to-Face Dates: REL Face to face week 8 - 12 July 2024 eLearning due by:08/07/2024

Class Time: 07:15 am ---- 03:30 pm

Unit 52/193 South Pine Road, Brendale QLD 4500 8 General Pricing $2,145.00

We Work With

Scroll to Top