Gas Training Courses
Gas Courses Queensland

One of the most popular foundational courses that we provide at Bizmatrix is the Type B Gas Fitting course. This particular course will teach you to install and service Type B appliances while fully complying with relevant industry standards. The Type B course will allow students to learn about different kinds of industrial gas appliances — these types of appliances require a particular skill set and relevant knowledge. If you are interested in conducting gas fitting in an industrial setting, this is the perfect course for you.

Take a look at some of the outcomes that are expected from students who have completed one of the Type B Gas Training Courses at Bizmatrix:
– Interpreting pre-existing design specifications
– Acquiring all of the necessary official approvals
– Making necessary preparations for work
– Performing installations of gas system components
– Testing as well as adjusting Type B appliances
– Completing work finalization processes

Who is the Type B Gas Course Intended For?

Generally speaking, the Type B Course is intended for individuals who are looking to upgrade their skills and qualifications for industrial gas fitting. Type B gas appliances include large water boilers in hotels or apartment buildings, gas fired package burners, industrial fryers, gas furnaces, etc. Most appliances that are used in an industrial or commercial setting fall into the Type B appliance category.

In order to attend this course at Bizmatrix, individuals must fulfill a certain number of prerequisites. In particular, they must hold a Registered or Full Electrical License or be qualified before the course officially begins. In this sense, students normally have a background in electrical work, plumbing or conducting Type A Gas Fitting.

Outcomes Type B Gas Fitting Courses

At Bizmatrix, we offer a combination of online learning and onsite training. Generally speaking, our course attendees are requested to complete the online module before commencing the onsite training. The training sessions organized by a member of our team are generally 10 days long (spread out over 3 weeks). Throughout this time, our participants are kindly requested to provide their own supplies: a digital multimeter, national grade clear safety glasses as well as footwear that is steel capped. This, in addition to paper and a pen, will be sufficient throughout the entire course. Finally, once the course has been completed, our students will receive an official Statement of Attainment by Bizmatrix which then allows them to apply for relevant licensing.

At Bizmatrix, we have years of experience conducting a wide variety of gas fitting modules for students throughout Queensland. Over the years, we have acquired a reputation for being thorough and providing some of the best quality gas fitting training and skills in Australia. If you are interested in finding out more about industrial, Type B Gas appliances and learning all you need to know from top-class professionals, contact us today for more information. Our team is always happy to answer any and all questions you might have, so feel free to get in touch with us today at 1 300 588 749!

Type B Gas Appliance Course

Nationally Recognized TrainingThis unit is selected from CPC40912 Certificate IV in Plumbing and Service. The unit to be complete is: CPCPGS4023B Install, commission and service Type B gas appliances.  The unit is delivered by qualified, experienced and industry current trainers/assessors. Each student will receive a comprehensive training manual, Voyage Of Discovery Manual a technical time machine of Type B information to guide them on their training journey, with real life theoretical training scenarios and simulators.

Who can do it?

The Type B Gas Course can be completed by those looking to learn about industrial gas fitting or seeking to expand their qualifications, upskill, increase their professional development on Type B industrial gas appliances installing, commissioning and servicing Type B industrial gas appliances in the plumbing, gas and electrical sector.

Type B gas appliances are typically large industrial gas appliances including: gas fired package burners, water and steam boilers found in large apartment blocks, industrial processing plants and dry cleaners. A Type B gas appliance is an appliance or system where there is no certification scheme to cover the testing of the appliance.

Other Type B gas appliances include, industrial fryers found at snack food processing plants, gas fired furnaces, gas turbines found at the Roma gas fields, Chinchilla gas plants or the natural gas power stations. Type B gas burners found in powder coated ovens, immersion heaters for heating the natural gas from the wells to gas burners to process aluminum or gas fired kilns. Small Type B high-pressure gas prawn cookers found on the fishing trawlers.

To undertake Type B gas work, the applicant must be authorised before working on any Type B gas system. This gas training unit (CPCPGS4023B) is one of the requirements for the application for authorisation in Queensland and for other states in Australia

DOWNLOAD PDF

AT A GLANCE

Requirements Restricted Electrical permit or Electrical License required to receive a Statement of Attainment
Education & training 10 days
Pre Course E-Learning Two days
Correspondence? No
Nationally recognised? Yes

SCOPE OF WORK

An appliance, with gas consumption in excess of 10 MJ/h, for which a certification scheme does not exist (applicable in Australia only).

NOTE: A Type A  gas appliance when used in an industrial/commercial application for which it was not intended is considered to be part of a Type B appliance. An example of this is a certified direct-fired air heater used as the heating/ventilating device in a spray/bake paint booth.

The gas pipework to the appliance is considered Type A gas work, therefore the Type B authorisation / approval qualification does not allow you to work on Type A gas appliances, and you are not authorised to install pipework, cylinders etc. to the Type B appliance, as this is considered Type A gas work.

The applicant must have a restricted electrical license, electrical permit or an equivalent electrical qualification  to receive the Statement of Attainment on completing the unit.

OR: If you do not already have the above qualifications, we now offer Type B Gas course blended restricted electrical training course (however please ensure you have a base trade of calling to be eligible to apply for the permit, otherwise 5 years of unstructured experience) which can be embedded in the Type B gas training. Otherwise if you have an electrical work permit for training to be enrolled in the suitable course.

  • Pre-course pack completed via correspondence or e-learning before commencing in class. 
  • Onsite training, 10 days in total at Brisbane training centre (5 days Monday to Friday with a week break in between, then return for 5 days Monday to Friday).

UNITS ON OFFER

  • CPCPGS4023B Install, commission and service Type B gas appliances
    Optional for those who don’t hold a restricted electrical licence:

  • UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
  • UEENEEP010A Disconnect / reconnect appliances connected to low voltage installation wiring (230Vac)
  • UEENEEP016A Locate and rectify faults in low voltage appliances using set procedures (230Vac)
  • UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

PRICING

10 Day Type B Gas Course

$4,100

10 Days

EARLY BIRD

$4,600

10 Days

STANDARD

$7,300

10 Days

DARWIN

Optional for those who don’t hold a restricted electrical licence:

Restricted Electrical Unit Cluster

$1,990

4 Days

RESTRICTED ELECTRICAL

LOCATIONS

Bizmatrix Type B Gas Course in Brisbane is held in Brendale.

Unit 52-53/193 South Pine Road, Brendale, Queensland

Training courses in Brisbane are held monthly.

Type B Gas training in Gladstone is held in South Trees.

Training location is at Site Skills, 17-19 South Trees Drive, South Trees QLD 4680

Courses in Gladstone are held every six months.

Type B Gas training in Sydney locations vary.

Training is offered annually.

Type B Gas training in Canberra locations vary.

Training is offered annually.

The Darwin facility

POWER AND WATER –

BEN HAMMOND COMPLEX- Building 9 

15 Illiffe Street DARWIN NT 0801

TRAINING DATES

    BRISBANE- Type B Gas Courses Dates 

  • TYBG-2-2018 – April 2018 Course Brisbane:  Pre-learning + 10 days face to face –Week 1: (5 Days) Monday 9th- Friday 14th APRIL  + Week 2:  (5 Days) 20th April | 1st-4th MAY 2018 
  • TYBG-3-2018 – July -August 2018 Course Brisbane:  Pre-learning + 10 days face to face –Week 1: (5 Days) Monday 16th- Friday 20th JULY  + Week 2:  (5 Days) 30th,31st JULY | 1-3 AUGUST 2018 
  • SYDNEY- Type B Gas Courses Dates – OCTOBER 2018  

  • TYBG-1SYDNEY-2018 – OCTOBER 2018 Course Complete five Modules:  Pre-elearning & Assessment  + 7 days face to face| Campbelltown Sydney  –Session 1: (2 Days) Thursday 18th, Friday 19th October   + Session 2:  (5 Days) 22-26th October 2018 
Name Date Time Location Available Spaces Cost
TYBG-3-2018 -Type B Gas Course Brisbane-July-Aug 2018 Wk.1.(16-20 July) Wk.2.(30,31July,1-3 August 2018) 07:30 am - 05:00 pm BRENDALE 7 $4,600.00

    SYDNEY- Type B Gas Courses Dates – OCTOBER 2018  

  • TYBG-1SYDNEY-2018 – OCTOBER 2018 Course Complete five Modules:  Pre-elearning & Assessment  + 7 days face to face| Campbelltown Sydney  –Session 1: (2 Days) Thursday 18th, Friday 19th October   + Session 2:  (5 Days) 22-26th October 2018 
Name Date Time Location Available Spaces Cost
TYBG-1-Sydney- Type B gas course -eLearning 5 modules October practical TYBG-1SYD- eLearn| face2Face 18-19,22-26 OCT- 7 da 07:30 am - 05:00 pm Sydney 10 $4,600.00

    DARWIN- Type B Gas Courses Dates 

  • TYBG-NTPW-2018 – MAY 2018 Course DARWIN NT: Enrolment CLOSED BOOKED OUT –   Pre-e-learning 5 Modules and a submission online / learning and assessments | must be completed before the face to face + 7 days face to face –Week 1: Tuesday 29th-31st May 1st JUNE  2018 | Monday  to Wednesday 4th-6th JUNE 2018
  • TYBG-NT-2-2018 – AUGUST 2018 Course DARWIN NT: Enrolment now open-   Pre-e-learning 5 Modules and a submission online / learning and assessments | must be completed before the face to face + 7 days face to face –Week 1: Tuesday 14th-17th August | Monday  to Wednesday 20th,21st,22nd August 2018 ( Tentative dates )  @ Charles Darwin University Campus
Name Date Time Location Available Spaces Cost
TBG-NT-2-2018 Type B Gas Course DARWIN AUGUST 2018 CPCPGS4023B-E-Learn(5 modules) 7 Day practical_ TGBNT-2-2018 Type B Darwin-Practical August 2018 07:30 am - 04:00 pm BIZMATRIX DARWIN NT 10 $7,300.00
© Copyright 2017 Bizmatrix | Privacy Policy | Sitemap